The Hammer Tool Usage

Use tools, tools must be familiar with the performance, characteristics, use, storage and maintenance and maintenance method. All kinds of construction tools must be formal manufacturer production of qualified products. Must inspect the tool before starting work, corrosion, deformation, is strictly prohibited unqualified tools such as loose, defective, damaged.

Hammer  such as China Hammer is the main and tools, composed of hammer and hammer handle and a hammer according to the function is divided into derusting, teats, mechanical hammer, claw hammer, inspection hammer, flat tail hammer hammer, star anise, German type octagonal hammer, hammer.

Hammer should be and the weight of the workpiece, material and function to adapt, too heavy and too light will not safe.

We are China File Manufacturer and China Manufacturers Of Saw. If you have demand, factory price will give you.

Manual Tool Safe Use Specification!

(1) when carrying hand tools such as China Power Tools, you should put them in a special belt or tool bag or tool bucket. Do not put them in the pockets of clothes or trousers, and do not put them in the belt.
(2) for tools which maybe be from Claw Hammer Supplier that are not used temporarily, they should be stored properly and placed stably, so that they will not fall off or hurt people. They should not be placed on scaffolds, overhead pipes and moving parts of machinery.
(3) hand over tools between operators, and do not throw them; When passing a tool with a sharp edge, turn the handle to the receiver.
(4) for tools that maybe be from Chipping Hammer Manufacturers which should be shouldered, such as crowbars, you should pay attention to the front and the left, so that they do not collide with other objects and personnel, and you should be sure to put them down.

A Crack in A Grinding Wheel

A rupture caused by a crack in a grinding wheel  such as China Grinding Wheel
Problem 1: when the grinding wheel hole is small or the shaft is big, the hard loading situation
Solution: grinding wheel hole and shaft should be able to be loaded smoothly, but not hard loading
Problem two: the support of flanges is not uniform (flanges are bent; The lead-filled layer bulges out; The burr of a flange; Uneven grinding wheel surface
Solution: the flange plate of grinding wheel should be processed to the right and left side of the specified smooth size. The plane part of the grinding wheel should be processed precisely, and the lead filling layer should not be convex.
We aslo supply China Measuring Tools and China Gear Puller. Welcome to our website know more details.

Standard for The Safe Use of Riveting Guns

1. As a Hand Riveter Manufacturers, we remand the following requirements shall be met when the riveter is used:

(1) the rivet holes on the riveted objects should cooperate with rivet sliding, and the overfilling should not be too large;
(2) during riveting, when the rivet shaft is not broken, the trigger can be pulled repeatedly until it is broken, and no forced torsion or pry break is allowed;
(3) if the rivet head or handle cap is loose during operation, it should be tightened immediately.
2. The inspection before operation shall meet the following requirements:
(1) the shell and handle do not show cracks or damage;
(2) the cable cord and plug are intact, the switch operates normally, and the zero protection connection is correct, firm and reliable;
(3) the protective covers of each department are complete and solid, and the electrical protection device is reliable.
3. Overload use is strictly prohibited. Attention should be paid to acoustics and temperature rise during operation, and stop the machine immediately if any abnormality is found. In the work time is too long, the temperature rise of the machines more than 60 ℃, should stop, after natural cooling, homework all right again. We are aslo Punch Tools Exporters. Welcome to our website know more details.

What Do You Know About Rivet Guns?

As Hand Riveter Manufacturers, we want to say Purpose of riveting gun: if the nut of a product needs to be installed on the outside, and the internal space is too small to allow the press head of the sub riveter to be inserted into the rivet and the splicing method fails to meet the strength requirements, then riveting and rivet are not feasible. Pull riveting must be applied to the fastening area of all thickness plates and pipes (0.5mm-6mm). Use pneumatic or hand pull riveting gun can be riveted once, convenient and firm; Replace the traditional welding nut, make up for the lack of metal sheet, thin tube welding melting, welding nut not good.
Type of riveting gun: according to the power type, the riveting gun can be divided into several types of electric, manual and pneumatic, among which the manual ordinary users are the most widely used, with low price and convenient operation, and cooperate with corresponding electric tools (such as hand electric drill and percussion drill).
There are also manual double-rivet guns, which are available at a discounted price, and used for outdoor billboard production. In fact, we are aslo Hand Riveter Manufacturers. If you have demand about our products, welcome to our website.

You should know the specifications of these grinding wheels!

Procedure/method for safe operation of grinding wheel such as China Grinding Wheel:
Before starting the machine tool, check whether the protective device of the machine tool and the reset switch of various actions are adjusted in place and firm. The protective cover used shall cover at least half of the diameter of the grinding wheel
After the grinding wheel is installed on the spindle of the grinder, it must be idled for not less than 5 minutes. When idling, the operator should stand in a safe position. It is strictly forbidden to stand in the front or tangential direction of the grinding wheel.
Use: use external surface to do the grinding wheel on the working surface. Grinding on the side is strictly prohibited to avoid the grinding wheel breaking.
During grinding, it is prohibited to use the lever to push the workpiece to increase the pressure on the grinding wheel.
When grinding or dressing a grinding wheel, feed the wheel properly and use a special dressing tool to trim the wheel. You should also wear protective equipment
.
The cooling liquid should be closed before the grinding wheel stops rotating, and the grinding wheel should continue rotating until the grinding fluid is completely thrown, so as not to affect the balance performance of the grinding wheel.
It is prohibited to use grinding fluid which is destructive to the tool binding agent. Do not use coolant below 0 c.
We supply all kinds hand tools such as China Measuring Tools. If you want to buy a lot of these tools at wholesale price, please feel free to contact us.

What are the hidden hazards of using hand tools?

These hazards may exist when you use the tools in your China Combination Set.
The hazards that common hand tools can cause include:

1. Cut by the sharp part.
2. Was stabbed with a sharp part.
3. Got hurt by tools.
4. Strike the hands while hammering.
5. Injured by flying shot of debris generated during work.
6. Be affected by the noise generated during work.
7. Dust generated when inhaling.
We supply China File Manufacturer.
We are China File Manufacturer.  If you have demand about our products, welcome to our website know more details, maybe there are the products you need such as China Gear Puller 

What Kinds of Drill Are There?

The drill rig such as China Punches is the main engine for the completion of drilling construction. It drives the drill tool and drill bit to drill deep into the stratum, and the lifting machine on the drill is used to complete the auxiliary work of lifting down the drill tool and casing, extracting the core and replacing the drill bit. Generally divided into the following categories:
(1) percussion drill: steel wire rope percussion drill, drill pipe percussion drill.
(2) rotary drill: vertical shaft type -- manual feed, screw differential feed, hydraulic feed drill; Rotary disc type -- steel rope plus or minus pressure type, hydraulic cylinder plus or minus pressure type drill; Mobile rotary - hydraulic power head, mechanical power head drill.
(3) vibrating drill.
(4) compound drill: a drill which has the functions of vibration, impact, rotation and static pressure combined in different combinations.
In fact, we are aslo Caulking Guns Suppliers. If you have demand about our products, welcome to our website know more details.

Matters Needing Attention During Pperation of Grinding Wheel

As an Grinding Wheel Exporters, we want to say In the daily use of the grinding wheel on the side, we can often find that the operator, regardless of the type of grinding wheel and the type of grinding wheel, freely grinds the side of the grinding wheel, which seriously violates the safety operating procedures and illegal operations. It is not advisable to use the side to grind the grinding wheel on the working face with the circumferential surface according to the procedures. This wheel has large radial strength and small axial strength. If the operator exerts too much force, the grinding wheel will break and even hurt people.

Positive operation problem daily use, many operators are used to operating on the grinding wheel, the reason for this direction can be used, in fact, such behavior should be particularly prohibited grinding wheel operation. The operator should stand at the side of the grinding wheel while grinding the workpiece with the grinder according to the operation procedure.

When using the grinder, some operators, especially young operators, in order to achieve fast grinding speed, excessive force, which is a very unsafe operation behavior. Any wheel has a certain strength when it is flat, which may cause the wheel to break or even fly out to hurt people.

In fact, we aslo are China Holesaw Set Supplier. Welcome to contact us

Do You Know All Kinds of Pliers?

We are Pliers Manufacturer China. Today we are going to learn about pliers
(1) water pump pliers
Pump pincers act like pipe pincers. However, it is lighter, smaller and easier to use than the pipe pliers. In general, it is more suitable for household emergency or simple installation of water pipes. Of course, the clamping force is not as good as the pipe pliers.
(2) carp pliers
Named for its carp-like appearance, the opening width of the nippers has two adjustable positions, which can be used for enlarging or shrinking. It is mainly used for holding circular parts, also can replace the spanner small nut and small bolt.
(3) retainer pliers
Commonly known as clip spring clamp, it is a special tool for the installation of internal spring ring and external spring ring. In shape, it belongs to the category of needle-nosed pliers. The clamp head can be used in several forms, including internal straight, external straight, internal bending and external bending.
(4) vise
The force pliers are mainly used for riveting, welding, grinding and other machining of clamping parts. Their characteristics are that the clamping mouth can lock tightly and generate large clamping force, so that the clamped parts will not loosen. Besides, the clamping mouth has many adjustable positions for clamping parts of different thickness and can also be used as a wrench.
In addition to the pliers, we also provide China Punches. If you want to know our products, welcome to our website!

Grinding Wheel Selection, Grinding No Longer for Grinding Wheel Selection Trouble

We are Grinding Wheel Exporters, today we want to say Selection of General Grinding Wheels:

1. Abrasive selection mainly depends on the workpiece material and heat treatment method.
A. when grinding materials with high tensile strength, choose abrasive materials with high toughness.
B. For materials with low hardness and high elongation, use a more brittle abrasive.
C. When grinding materials with high hardness, choose abrasive materials with higher hardness.
D. Use abrasive materials that are not easily processed for chemical reactions.
2. The following selection principles of grinding wheel hardness are for reference:
A. Choose hard grinding wheel when grinding soft materials, and soft grinding wheel when grinding hard materials;
B. When grinding soft and strong nonferrous metals, the hardness should be selected to be softer;
C. Soft grinding wheel should be selected for grinding materials with poor thermal conductivity;
D. When end face grinding is more difficult than peripheral grinding, the grinding wheel should be softer;
E. Under the same grinding conditions, the hardness of the resin bond wheel is 1~2 lower than that of the ceramic bond wheel;
F. When the grinding wheel rotation speed is high, the hardness of the grinding wheel can be selected as soft 1~2 grades;
G. Grinding with cooling fluid is one to two grades of hardness higher than that of the grinding wheel during dry grinding.

We are Knife Cutters Supplier. If you have demand about products, welcome to contact us. You can aslo come to our website. There are lots of products such as China Punches.

What Do You Know About The Claw Hammer?

As a Claw Hammers Exporter, we want to say To get a nail, a claw hammer is a hammer with a rounded end and a flat, downward curve. The claw hammer was invented in ancient Rome, but the modern style is American.

By handle: wood handle, steel pipe handle, fiber handle, plastic handle, etc.
Hammer head: American, British, Italian.
Lever principle of claw hammer:
When the lever is used, in order to save power, the lever should be used when the power arm is longer than the resistance arm. If you want to save distance, you should use a lever with the power arm shorter than the resistance arm. Therefore, the use of the lever can save effort, can also save distance. But to save effort, you have to move more distances. If you want to move less, you have to work harder. It is impossible to move with less effort and less distance. It is from these axioms that, on the basis of the "center of gravity" theory, Archimedes discovered the lever principle, that is, "when two weights are balanced, their distance from the fulcrum is inversely proportional to the weight.

In fact , we Wholesale Hand Tools. Welcome to our website know more details.Maybe there are the products you need such as China Power Tools.

How to Caulk Like A Pro?

First, you must evaluate your caulking and determine the proper caulking tools such as Aluminum Tube Caulking Gun. There are many different ways of caulking, color and distribution in general.
Vinyl latex has the best caulking effect on dry areas. In a moist place, dot the silicone caulk. Butyl rubber is very useful for external work. However, for interior home finishing caulk projects, use latex or silicone caulk.
The type of caulking gun or dispensing tool you use is an important decision. Caulk can be purchased in extruded tube or cartridge. A caulk barrel and a smooth action caulk gun are best, thanks to economic and professional results.

We are Hardware Manufacturers in China. We offer a variety of hand tools, power tools, such as China Punches. If you have demand, welcome to our website!

Causes of Grinding Wheel Rupture

As a Grinding Wheel Exporters,We want to say grinding wheel in use process will appear rupture, a lot of people will put the question comes down to, thought to be caused by the poor quality of the grinding wheel, grinding wheel actually rupture is caused by many reasons, of course, the quality of the grinding wheel may also be one of these, in addition also and storage transportation and the bursting of the grinding wheel using methods, such as today we once produced by grinding wheel cracking broken problem, and solution.
Problem 1: when the grinding wheel hole is small or the shaft is big, the hard loading situation
Solution: grinding wheel hole and shaft should be able to be loaded smoothly, but not hard loading
Problem two: the support of flanges is not uniform (flanges are bent; The lead-filled layer bulges out; The burr of a flange; Uneven grinding wheel surface
Solution: the flange plate of grinding wheel should be processed to the right and left side of the specified smooth size. The plane part of the grinding wheel should be processed precisely, and the lead filling layer should not be convex.
Problem 3: the bolt's fastening force is too large
Solution: the flanged nut of the flanges is too hard to tighten, which will make the flanges deviate and twist, so that the local force of the grinding wheel is large, so it should be tightened moderately

In fact, We are aslo China File Manufacturer. We provide high quility products. If you are interested, welcome to our website know details. Maybe there are the products you need such as China Combination Set.

Development Features and Trends of Landscape Tools Industry

As an China Garden Tools Manufacturer, We find Garden tools manufacturers began domestic manufacturers carry out independent brand construction
With the improvement of production costs, the European and American developed country garden tools manufacturers into train of thought, to transfer production manufacturing to developing countries, on the one hand, to build production base in developing countries, such as high-quality, TTI, komatsu, such as company, on the other hand with the domestic manufacturers use the patterns such as OEM, ODM cooperation, the cooperation mode for domestic garden tools manufacturers create business opportunities. Domestic manufacturers in cooperation with foreign manufacturers, according to the requirements of each other in terms of product quality management and production, foreign manufacturers on a regular basis to the test in the production process and product quality management, which is beneficial to learn from the advanced international level, domestic manufacturers greatly improve the product research and development and production management ability of domestic manufacturers.
While cooperating with foreign customers, domestic manufacturers are fully aware of the importance of independent brands. Good self-owned brands can bring more added value to the enterprise and enable the enterprise to focus more on product design and research and development. Therefore, some domestic manufacturers have gradually carried out the construction, management and sales of self-owned brands on the basis of OEM and ODM business.

We are Claw Hammers Supplier China. If you are interested in our products, you can visit our website for more products. Because we don't just provide that!

The Most Commonly Used Hand Tool - The Hammer

As a China Hammer Suppliers, I want to say a hammer is also one of the most commonly used hand tools. It is a tool that strikes an object to move or deform it. It is most commonly used to knock nails, correct or open objects. Hammers come in a variety of forms, often in the form of a handle and top. One side of the top is flat to hit, and the other side is the hammer head. The hammer head can be shaped like a ram's horn or a wedge to pull out a nail. There is also a hammer head with a round head.

A hammer is a commonly used blunt instrument in architecture. It can be used to build, shape or break down.
Although they look and work the same, it's important to use them differently. The choice of weight, shape and hammerhead material depends on what you're going to hit with it. The hammer can concentrate its strength in a small area, the long handle can create a stronger impact, the short handle is more controlled, the wooden handle can absorb shock, the steel handle is sturdy but painless, the fiberglass and other materials are durable and comfortable but the price is higher

We are China Manufacturers Of Scissors. Of crouse, we supply power tools and other handtools such as Hex Allen Key Leading. If you have demand, welcome to contact us!

Development Trend of Garden Tools in Asian Market

The asia-pacific region will be the fastest growing region in the global garden tools market, especially China Garden Tools will have a high compound growth rate. And the Chinese market still maintained the biggest market share in the asia-pacific region. Japan will continue to maintain its position as the second largest market in the region, but the annual compound growth rate is expected to remain low at 1.6 percent.
China is the main production base of garden tools in the world. Because garden tools are mainly exported and mainly exported by shipping, the production area is mainly in the coastal area. For example, Claw Hammer Supplier are mainly distributed in eastern China in zhejiang, jiangsu and shandong provinces.
The export market demand of garden tools is different, and Chinese garden tools suppliers need to make differentiated product planning according to the different economic and cultural demands of different countries and regions.

We are China Power Tools Wholesale. In addition to providing power tools, we also provide manual tools. Welcome to contact us for product details!

What Is The Development Trend of Landscape Tools Industry?

Garden tools such as China Garden Tools refer to the machinery and equipment involved in the gardening, greening and its later maintenance, including lawn construction and maintenance machinery, green space construction and maintenance machinery, urban arbor and shrub planting and maintenance machinery, flower cultivation facilities and equipment, garden engineering and professional sports fields, etc.
After entering the 21st century, with the economic development, people's requirements for living and working environments have been raised, and the demand for garden tools such as China Caulking Gun has become more and more exuberant. Garden tools industry has been mature in developed countries, among which Europe and the United States are the main areas of garden tools consumption. Landscape tools are developing rapidly in developing countries, mainly in Asia and South America.

Besides, we are a Hole Saws Factory. If you have ant demand about hand tools and power tools, welcome to contact us at any time!

The China Grease Gun And China Foam Gun

China Grease Gun tips：
·Pull the lever out so that the piston inside the cylinder is close to the rear end cover, and then lock the lever.
·Hold the oil storage cylinder with one hand and hold the hand pressure lever with the other hand. Reciprocate the hand pressure lever to discharge the air in the cylinder. When the grease is found at the oil nozzle, stop the hand pressure lever.
·Align the grease fitting on the front end of the oil filler rod and press it on the grease nozzle where the oil injection part is to be lubricated. Press the hand pressure lever down to the oil storage cylinder until it can not be pressed down. Then lift the hand pressure lever to the original position. .
·The other end of the hose is equipped with a mouthpiece and an internal plug which are matched with the thread of the grease fitting. The inner plug is inserted into the grease fitting of the oil filling part, and then the mouthpiece is tightened, and the lubricating grease can be added to the oiling according to the above method. Part.
China Foam Gun tips：
· The foam gun can be used when the fire protection system supplies 3% or 6% of various types of foam mixture; the ball valve should be closed.
·The foam gun can also be used for self-priming foaming liquid when the fire protection system supplies pressurized water; the ball valve should be fully open at this time.
· The foam gun is equipped with a round handwheel that is easy to operate and protects the gun. When using it, the operator should grasp the handwheel of the gun. At the same time, it should be noted that the pressure of the water or mixture supplied to the gun should be gradually increased, but it should not be exceeded. Pressure range; to avoid sudden impact or excessive pressure to the operator.
· Try to follow the wind direction when spraying.

This Versatile 7-Piece Screwdriver Set Is Easy To Use

The 7-Piece Screwdriver Set is the most common for us. Many times we don't feel it's existence, even neglect it, but when it's really needed, it often comes up with "lip lips are not right" - model Or the size is completely out of place. The screwdriver I experienced today is not exquisite in my opinion, nor is it eye-catching. The biggest advantage for users is that it is convenient.
This is a 7-in-1 multi-function card holder-type repair tool from Sinotool' s STI screwdriver set. It gives the first impression that it is compact and portable. It is like a “notebook” that can be easily carried around. carry. However, its existence can really solve our daily needs?
From the appearance point of view, it does not look so delicate, but workmanship is still worthy of recognition. The three-layer folding design of the leather is used to wrap the head of the screwdriver with a dark buckle, the length is 105mm, and the width after the combination is 65mm.
We are not only product the 7-piece screwdriver set, because we are the China Hand Tools Factory.

Why Grinding Wheel Does Not Work Properly?

What are the precautions for using the grinding wheel for the best grinding performance?
The speed of the wheel
The maximum working speed is specified on the label of the grinding wheel, and it is necessary to check whether the speed of the machine spindle is within the linear speed range of the grinding wheel before use. Sometimes only check the machine's motor speed is not enough, but also to calculate the speed of the belt.
Operation of the normative
The operator sometimes does not follow the process requirements. So that the wheel is difficult to work properly, the workpiece is likely to cause burns, and some burn the surface does not show blue burns traces, but in fact the hardness of the workpiece has been down, the quality of the workpiece a great impact.
Diamond dresser
Diamond pen and the grinding wheel of the normal line to have a 15 ° angle, the pen can turn a few faces to a long time to keep sharp, if the diamond pen after the blunt do not check the replacement, still continue to dress the wheel, and know its grinding quality is not good.
Grinding machine maintenance work
In accordance with safety maintenance requirements, the machine needs to be regularly repaired.

How Should The Gear Be Removed?

As a professional China Gear Puller Supplier, today we will talk about some knowledge of gear disassembly.
First of all, gear is a mechanical component with teeth on the wheel rim that can continuously mesh to transfer motion and power. It is a mechanical part with teeth that can mesh with each other.
Generally, gear with heavy radial load has axial fixed design, such as spring and taper pin. Remove the gears before you unload them. In some cases, the gear is fastened to the shaft (with overfill fit), and the gear needs to be heated for disassembly.

You can also contact us directly if you want more information. We are not only a supplier of gear disassembly, but also a Super Clamp Factory. We also produce a variety of China Hand Tools, welcome to consult at any time!

The Development Of Agricultural Production Tools

We are a leading China Agriculture Tools Manufacturers, today we are going to talk about the development of agricultural production tools.
First of all, the content and form of production tools are constantly developing and changing with the development of economy and science and technology. The early tools of production (stone and wood tools, metal tools) were operated by the hands of laborers who depended on their own physical strength. Later machines include tool machines, power machines and transmission devices, forming complex systems. And the modern automation machine system, added the electronic computer as the core of the automatic control device. The increasingly complex production tools and sophisticated production tools are an important factor in promoting the development of social productive forces.

We provide very complete agricultural production tools such as China Foam Gun. welcome to visit our website for more information!

Garden tools - make conservation easier

We are a leading China Garden Tools Factory. Today, let's talk about the importance of garden tools in greening.
As the only infrastructure with life in the city, urban greening plays the role of improving urban ecology and beautifying the urban environment with abundant garden plants, complete green space system, beautiful landscape and complete facilities.
The scope of urban greening management is extensive and complicated, which is a continuous and long-term work.
Due to the lack of innovation awareness of most maintenance workers, the operation technology content is low, the work efficiency is not high, and there are still many places where the management of landscaping maintenance is not in place. However, with the development of productivity, the shortage of labor force and the continuous improvement of nursing standards, high-quality garden products will dominate the market and become the most important boost for the development of landscaping.

If you have any demand about Garden Tools,welcome to contact us. We supply all kinds of Garden Tools such as China Foam Gun.

Safety precautions for manual tool handle

Manual tools are a category of hardware industry, belongs to consumable goods. Maybe you know a lot about the sale of China Hand Tools, and their specific purchase volume and purchase frequency are treated according to the specific circumstances. In the security industry, there are many opportunities for us to get access to manual tools. In order to achieve better safety production, it is necessary for us security personnel to understand the usage specifications of manual tools.
(1) the tool handle part hit by the hammer is vulnerable to local fragmentation due to long-term impact. For this reason, metal hoop (bronze ring) should be installed at the end of the tool shank such as chisels, punch heads, rock drill, etc.
(2) for the hand tools that need to be installed with wooden handle, the wooden handle should be made of tough and resilient wood (such as oak, elm, walnut, locust, maple, etc.). The handle shall have a smooth surface, free from scarring, cracks and other defects.
(3) the connection between the wooden handle and the hammer head and axe must be firm and solid, so as to prevent the handle from breaking off or the hammer head flying out. If the handle is loose in use, it must be immediately wedged. Must not only rely on wedge fastening, wooden handle and equipment hole coordination is more important.
(4) to prevent the wooden handle from spinning and slipping in the hand, the wooden handle should be made into an oval shape.

We are a professional Hand Tools Supplier. We provide not only hand tools, but also Electric Power Tool. Welcome to our website know more!

Pull the riveting of the Hand Riveter

About Pull the riveting of the Hand Riveter which Is provided by Hand Riveter Suppliers
Rivets is a hollow rivet, central is equipped with a screw stem, nailing stalk end of round collar shape, and the central has the scale, operation rivet holes, first insert the snap rivets, using manual or pneumatic pull riveting gun | riveter clamp head rivets live terrier, nail biting, and to pull the rivet head pressure, pull force material softer rivet head outward expansion into flange form, so that the material together, and then a tensioning until the screw stem is pulled, the plate can be riveted.

We are a professional rivet gun supplier, in addition to the supply of rivet guns, we also provide Aluminum Tube Caulking Gun and more China Power Tools. If you want more details, please feel free to contact us!

The importance of Agriculture Hand Tools in American agricultural production

Agriculture Hand Tools are of great importance in American agricultural production and are essential equipment for agricultural production. We know that the United States is a major producer and trader of food and oil crops and animal products. Nearly 50 percent of food and oil crops and 40 percent of animal products are exported every year. With the acceleration of China's economic development and urbanization, the decrease of arable land year by year and the gradual expansion of the demand for grain, oil and livestock products, the agricultural trade between China and the United States will further develop. The understanding of the American agricultural production industry is of great significance to our economic and trade exchanges. We are a leading supplier in the handwork tool production industry. We provide the required Tool Sets and Wholesale Hand Tools. If you have any requirements, please feel free to contact us at any time.

Market analysis of China Hand Tools

What do you know about the China Hand Tools Market?
At present, the imported mould with nearly 1 billion dollars a year, including precision, large, complex, long-life mold majority, so from the perspective of import less, this kind of high-grade product hand tools, hardware tools in market share proportion will gradually increase. With the rapid development of China's daily hardware industry, handwork tools are one of the main products for export in China. Especially with the acceleration of global economic integration, the manual tool processing industry has gradually become the main force in the world hardware tool production industry.

Mention Chinese market of garden tools, hand tools have to say maybe you will see a lot of China Garden Tools Factory, it proved that from the side garden tools industry has developed rapidly in our country, but compared with developed countries, garden tools industry in China started relatively late, the competitiveness is weak, at present our country has not formed the global well-known brand enterprise.

The Development Status Of China Hand Tools

The development of China Hand Tools is mainly affected by the price of raw materials such as steel.
At present, the main market of China Hand Tools Factory is overseas market. Especially in fujian, jiangsu, shandong and zhejiang hand tools manufacturers are improving their production capacity to fully cope with the expected rise in export sales, mid-range, high-end products by expanding overseas market coverage and better profit margins. Manual tool makers are confident about the outlook, with more than 50 percent predicting growth of more than 10 percent overseas.

Chinese consumers competitors move tool information sources are mainly concentrated in stores, exhibitions, symposium, the salesman selling, in particular when consumers first buy for brand awareness is not enough, a large proportion of people are only after the purchase and use knowledge of hand tools brand and quality. It can be said that the establishment of the manual tool brand is the best time for china hand tools.

What do you know about China Agriculture Tools?

Agriculture is a vital industry in China. In fact, China Agriculture Tools has been exported in large quantities, Meetting the needs of agricultural equipment in developed agricultural countries.

When it comes to agriculture, it has to be said mechanization in the agricultural practices has played an important role over the years. Agricultural trailer parts and machines and their usage has not only enhanced farm productivity but has made agricultural practices more environmentally sustainable.

As one of the biggest hand tools exporters in China, Hebei Sinotools Industrial Co.,Ltd. enjoys an excellent business relationship with our customers around the world. We can definitely meet your demand for high-quality China Agriculture Tools. If you need Hand Axe, Please choose Hand Axe Leading Manufacturers like us. Actturely, You know we don't only manufature Hand Axe. Just a exmaple.

How To Use a File

Basic method

Rough machining and filing ( rough file ): when the machining allowance is greater than 0.5 mm, 300 mm and 350 mm thick and medium tooth files are generally selected for large cutting amount machining to remove with a larger part of the workpiece allowance.

Fine machining and filing ( fine file ): when the machining allowance is between 0.5 mm and 0.1 mm, 250 mm and 300 mm fine tooth files are generally used for small cutting amount machining to approach the required size of the workpiece.

Finishing filing ( finishing filing ): when the machining allowance is less than 0.1 mm, 200 mm and 250 mm fine tooth files, double fine tooth files and shaping files are generally selected to carry out finishing processing on the workpiece so as to reach the required size of the workpiece.

Full filing: when the file is pushed forward, its stroke length is basically close to the of the file surface length It is generally used for processing with rough files and fine files.

Short filing: when the file is pushed forward, its stroke length is only 1 / 2 ~ 1 / 4. of the file surface length generally used for finishing.

Sinotools, as a professional China file manufacturer, is a welcomed company to manufacture the all variety hand tools. 

Screwdriver Overview

Screwdriver, a tool used to twist a screw to force it into place, usually with a thin wedge-shaped head that can be inserted into a slot or notch of a screw head - the Beijing-Tianjin-Hebei dialect is called "a gaizhui" ", Shaanxi, Anhui, Henan and Hubei and other places called the qizi. There are two main types (negative sign) and cross (positive sign). There are also common hex screwdrivers, including two kinds of out hexagonal and inner hexagonal.
From the structural shape, there are usually the following:

1, straight. This is the most common kind. The head model has one word, cross, meter, T (Plum), H (hex), etc.

2, L-shaped. More common in hex screwdrivers, use their longer rods to increase torque, which is more labor-saving.

3, T-shaped. Automotive industry more applications.
Sinotools is one of the professional screwdrivers manufacturer in China.

Hammer In Hammer Crusher

The hammer is the main part of the hammer crusher. The quality, shape and material of the hammerhead have a great influence on the crusher's production capacity. The choice of hammer type, size and quality. It mainly depends on the nature and size of the material being processed.

Hammer type

(1) Engineer's Ball Pein Hammer

(2) Engineer's Ball Pein Hammer With Fibre Glandle

(3) American-type Ball Hammer with Fibre Glass Handle

(4) American-type Ball Hammer with Bleaching Handle

(5) Claw Hammers

(6) Claw Hammer with Steel Handle

(7)American type Claw Hammer

(8) British Type Claw Hammer

(9)Machinists Hammer

(10)German Type Machinist Hammer

(11)German Type Machinist Hammer With

(12)Machinist's Hammer With Turular Steel Handle

(13)German Type Machinist's Hammer With Turular Steel Handle

(14)American Type Cross Pein Hammer With Fiber glass Handle LE

(15)American Type sledge Hammer With Fiber glass Handle LE

(16) Drill (square hole) fiber handle ball hammer

(17) Joiner's Hammer

(18)Engineer's Cross Pein Hammer

(19)Welding Hammer

(20)Club Hammer

(21)Double Faced Black smith's Hammer

Sinotools is a professional machinist hammers supplier.

When Using a Hammer, The Following Points Should Be Noted:

(1) The connection between the hammer head and the handle must be firm. All the hammer heads and hammer handles must be loose, and the hammer handles must not be split or cracked. The wedges of the hammer head and hammer handle in the mounting hole are preferably metal wedges. The length of the wedge should not be greater than 2/3 of the depth of the mounting hole.

(2) In order to have a certain degree of elasticity when hitting, the middle of the handle is slightly narrower than the end.

(3) When using a sledgehammer, it is necessary to pay attention to the front, rear, left, right, and up and down. It is forbidden to stand in the scope of the sledgehammer, and it is forbidden to use a sledgehammer and a hammer to play.

(4) The hammerhead is not allowed to quench, no cracks and burrs are allowed, and it is found that flashing and thorn must be repaired in time.

Claw hammers can strike, hammer, and lift nails, but claw hammers should not be used for hammering large workpieces. When nailing the nail, the hammer should hit the nail cap horizontally so that the nail can enter the timber vertically. When lifting the nail, it is better to put a block of wood on the horns to increase the pull-out force. The claw hammer should not be used as a cookware. Pay attention to hammering. The flat surface is intact to prevent the nails from flying out or the hammer from slipping.

How to use the China hammer

The China hammer is the main striking tool. It is composed of a hammer head and hammer handle. The hammer is divided into rust removal, teat hammer, mechanical, claw hammers, inspection hammer, flat tail inspection hammer, octagonal hammer, German octagonal hammer and hammering hammer according to the function. 

The weight of the China hammer should be compatible with the work piece, material and action. Too heavy and too light will not be safe. When the mass of the hammer is increased by 1 time, the energy is increased by 1 time, and when the speed is increased by 1 time, the energy is increased by 4 times. Therefore, for the sake of safety, when using a hammer, the hammer must be properly selected and the speed at which it strikes must be mastered.

When using a hand hammer, pay attention to the connection between the hammer head and the hammer handle must be solid, slightly loose should immediately add wedge or replace the hammer handle. The length of the hammer handle must be moderate, experience to provide a more appropriate length is the hand hammer. The length of the head and forearm is the same as the length of the hand hammer; the hand swing method can be used when a small striking force is needed, and the arm swing method should be used when a strong striking force is required; and attention should be paid when using the arm swing method. Hammer movement arc, hammer handle should not be contaminated with grease. Sinotools is a professional claw hammer supplier.

China Hammer

Wrenches

One of the commonly used China power tools is wrenches. It utilizes the lever principle to twist bolts, nuts, screws and other threads. Usually, the grip shank is formed on one or both ends of the shank of the wrenches. When an external force is applied to the shank in the direction of thread rotation, the bolts and nuts can be twisted.
Application of socket wrench
The sleeve is a cylindrical tool for disassembling a nut or bolt, and its inner surface has a hexagonal cross-section. Sleeve specifications are in English and metric. The bushes in inch sizes are incremented by 1:16 inches and 1:32 inches; the bushes in metric sizes are incremented by 1 cm. For the owner, when a car tire or spark plug is disassembled, a socket wrench is needed.

socket wrench

The Correct Use Of China Hand Tools

1.Metalworking hand bow saw: Use suitable saw blades (circular saw blade)for work items, such as sawing hard or thick soft metal with 14 teeth per file; 18 steels per file for tool steel, iron pipe, hard metal, etc.; and 24 teeth per file. It is suitable for sawing of metal plates, metal pipes and fine iron bars. Push the saw forward and gently lift it when you pull it back.
2.Wrench: 1） Select the appropriate size wrench according to the nature of work. 2 ）When using an adjustable spanner, apply force to the fixed side. Never use force toward the movable side. 3 ）If the wrench opening is worn out or slipping during use, do not continue to use it to avoid scratching your hands. 4） Do not use the spanner as a tap. 5 ）Do not add a pipe to the handle end to increase the torque of the wrench. Sinotools, a professional China filter wrench supplier，offer the high quality hand tools.

Why Learn How To Use China Hand Tools Correctly?

Hand tools, are mainly used to twist or strength the tools relative to electric tools. Hand tools can be divided into wrenches, pliers, and auxiliary types depending on the application. Each type has a different model. China agriculture tools are the common ones.

Most people are not trained before using manual tools, and as a result, accidental injuries occur frequently. According to statistics, injuries caused by improper use of hand tools each year account for 7% to 8% of all accidental injuries. Therefore, for all types of manual tools and portable electric tools that are commonly used, it is necessary to understand the correct use of the manual tools and maintenance management, and pay attention to the use of safety.

China Agriculture Tools

Classification Of Manual Tools

Hand tools in China can be divided into wrenches, pliers, screwdrivers, tape measures, hammers, sleeves, cuttings, scissors, sets of sets, and auxiliary types depending on the purpose. Each type has a different type.

Wrenches are open end wrenches, double plum wrenches, ratcheting dual-use wrenches, dual-purpose wrenches, tubing wrenches, T-type socket wrenches, cross-sleeve wrenches, adjustable wrenches and other categories;
Pliers are wire cutters, needle-nose pliers, diagonal pliers, retaining ring pliers, pliers pliers, water pump pliers, pipe wrenches, pliers, etc.
The screwdriver has one word, cross, meter, hexagon, pattern, etc.
Sleeve type is divided into pneumatic sleeve and manual sleeve;
Hammer has claw hammers, fitter hammer, ball hammer, rubber hammer and mounting hammer;
There are boring cutters, diamond files, tin scissors, aviation scissors, utility knives, square pipe saws, pipe cutters, and bolt cutters.

China Hand Tools Selection Method Introduction

China hand tools packaging is clear or not.
The brand has a dedicated designer who designs the outer packaging and arranges production at the factory where the production conditions are passed. The packaging is very clear from lines to color blocks. Some imported brands also have unique designs designed to protect intellectual property.

"Rising your ears" to hear sound
Hold the product and shake it to see if it has any noise. The production conditions of most counterfeit products are backward, and manual workshop-type operations are completely carried out. In the production process, impurities such as sand are inevitably incorporated and hidden in the bearing body, so that noises are generated when rotating. This is the biggest difference from a genuine factory brand that strictly enforces production standards and operates with machines.

Hand Tools Selection Guide

Does the surface have cloudy oil traces?
When it comes to hardware products, it must be seen whether the treatment of rust-proof technology is qualified. When purchasing the China hand tools, you can see whether the product will leave a thick trace of oil on your hands. Whether your hand will be thick or not, if it is, this product is generally not qualified. In addition, it can be identified by smell, if the product has a pungent odor, generally, it is not  also qualified in the production.

Whether the stencil printing is clear or not.
Hardware products are generally printed with branded words, labels, etc. Although small, most of the products produced by the factory are stamped and printed without the heat treatment. Therefore, the fonts are small, but concave and very clear. The counterfeit product's font is rather vague. Due to the rough printing technology, the font floats on the surface, and some can even be easily wiped off by hand.

Do You Know How To Use The Claw Hammers And The Wrench?

1.Claw Hammers: It is a tool that strikes an object to move or deform it. The most common use is to knock a nail, correct it, or knock it open. Hammers come in a variety of forms. The common form is a handle and top. The top side is flat for tapping, and the other side is the hammerhead. The hammer head is shaped like a horn and its function is to pull out a nail.
2.Wrench: Use the lever principle to twist bolts, screws, nuts, and other threaded hand tools that hold the bolt or nut openings or sleeve holes. The wrench usually has an external force applied to the shank of the handle at one or both ends of the shank to apply an external force, and the bolt or nut holding opening or sleeve hole of the bolt or nut can be twisted. When the external force is applied to the shank in the direction of thread rotation, the bolt or nut can be turned. Sinotools is one of the professional wrenches manufacturer in China.

Usages of China Hand Tools

As we all know, China hand tools are indispensable hardware products in daily life and production, and have a decisive role in people's life and social production. So, do you know the use of various types of hand tools? How should we use it properly?
1. Screwdriver: A tool used to twist a screw to force it into place. It usually has a thin wedge-shaped head that can be inserted into the slot or notch of a screw head - also known as a "taper." Sinotools is one of the professional screwdrivers manufacturer in China.
2. Wallpaper knife: a knife, blade sharp, used to cut wallpaper, hence given the name "wallpaper knife", also known as "the utility knife." They are often used in the decoration and billboards industry.

Can Fair Pictures Show

We are on the 123rd Canton Fair in Guangzhou, China. After 3 days’ display, we have met with many friends there. They expressed their love and trust to our new brand-PROBUILT. Thanks for your choice. We will do better. These pictures below are our products showing on our booth, including screwdriver, pliers and other hand tools. Remember us, we are screwdriver manufacturer, pliers manufacturer in China.