Hammer In Hammer Crusher

The hammer is the main part of the hammer crusher. The quality, shape and material of the hammerhead have a great influence on the crusher's production capacity. The choice of hammer type, size and quality. It mainly depends on the nature and size of the material being processed.

Hammer type

(1) Engineer's Ball Pein Hammer

(2) Engineer's Ball Pein Hammer With Fibre Glandle

(3) American-type Ball Hammer with Fibre Glass Handle

(4) American-type Ball Hammer with Bleaching Handle

(5) Claw Hammers

(6) Claw Hammer with Steel Handle

(7)American type Claw Hammer

(8) British Type Claw Hammer

(9)Machinists Hammer

(10)German Type Machinist Hammer

(11)German Type Machinist Hammer With

(12)Machinist's Hammer With Turular Steel Handle

(13)German Type Machinist's Hammer With Turular Steel Handle

(14)American Type Cross Pein Hammer With Fiber glass Handle LE

(15)American Type sledge Hammer With Fiber glass Handle LE

(16) Drill (square hole) fiber handle ball hammer

(17) Joiner's Hammer

(18)Engineer's Cross Pein Hammer

(19)Welding Hammer

(20)Club Hammer

(21)Double Faced Black smith's Hammer

Sinotools is a professional machinist hammers supplier.

When Using a Hammer, The Following Points Should Be Noted:

(1) The connection between the hammer head and the handle must be firm. All the hammer heads and hammer handles must be loose, and the hammer handles must not be split or cracked. The wedges of the hammer head and hammer handle in the mounting hole are preferably metal wedges. The length of the wedge should not be greater than 2/3 of the depth of the mounting hole.

(2) In order to have a certain degree of elasticity when hitting, the middle of the handle is slightly narrower than the end.

(3) When using a sledgehammer, it is necessary to pay attention to the front, rear, left, right, and up and down. It is forbidden to stand in the scope of the sledgehammer, and it is forbidden to use a sledgehammer and a hammer to play.

(4) The hammerhead is not allowed to quench, no cracks and burrs are allowed, and it is found that flashing and thorn must be repaired in time.

Claw hammers can strike, hammer, and lift nails, but claw hammers should not be used for hammering large workpieces. When nailing the nail, the hammer should hit the nail cap horizontally so that the nail can enter the timber vertically. When lifting the nail, it is better to put a block of wood on the horns to increase the pull-out force. The claw hammer should not be used as a cookware. Pay attention to hammering. The flat surface is intact to prevent the nails from flying out or the hammer from slipping.

How to use the China hammer

The China hammer is the main striking tool. It is composed of a hammer head and hammer handle. The hammer is divided into rust removal, teat hammer, mechanical, claw hammers, inspection hammer, flat tail inspection hammer, octagonal hammer, German octagonal hammer and hammering hammer according to the function. 

The weight of the China hammer should be compatible with the work piece, material and action. Too heavy and too light will not be safe. When the mass of the hammer is increased by 1 time, the energy is increased by 1 time, and when the speed is increased by 1 time, the energy is increased by 4 times. Therefore, for the sake of safety, when using a hammer, the hammer must be properly selected and the speed at which it strikes must be mastered.

When using a hand hammer, pay attention to the connection between the hammer head and the hammer handle must be solid, slightly loose should immediately add wedge or replace the hammer handle. The length of the hammer handle must be moderate, experience to provide a more appropriate length is the hand hammer. The length of the head and forearm is the same as the length of the hand hammer; the hand swing method can be used when a small striking force is needed, and the arm swing method should be used when a strong striking force is required; and attention should be paid when using the arm swing method. Hammer movement arc, hammer handle should not be contaminated with grease. Sinotools is a professional claw hammer supplier.

China Hammer

Do You Know How To Use The Claw Hammers And The Wrench?

1.Claw Hammers: It is a tool that strikes an object to move or deform it. The most common use is to knock a nail, correct it, or knock it open. Hammers come in a variety of forms. The common form is a handle and top. The top side is flat for tapping, and the other side is the hammerhead. The hammer head is shaped like a horn and its function is to pull out a nail.
2.Wrench: Use the lever principle to twist bolts, screws, nuts, and other threaded hand tools that hold the bolt or nut openings or sleeve holes. The wrench usually has an external force applied to the shank of the handle at one or both ends of the shank to apply an external force, and the bolt or nut holding opening or sleeve hole of the bolt or nut can be twisted. When the external force is applied to the shank in the direction of thread rotation, the bolt or nut can be turned. Sinotools is one of the professional wrenches manufacturer in China.