Standard for The Safe Use of Riveting Guns

1. As a Hand Riveter Manufacturers, we remand the following requirements shall be met when the riveter is used:

(1) the rivet holes on the riveted objects should cooperate with rivet sliding, and the overfilling should not be too large;
(2) during riveting, when the rivet shaft is not broken, the trigger can be pulled repeatedly until it is broken, and no forced torsion or pry break is allowed;
(3) if the rivet head or handle cap is loose during operation, it should be tightened immediately.
2. The inspection before operation shall meet the following requirements:
(1) the shell and handle do not show cracks or damage;
(2) the cable cord and plug are intact, the switch operates normally, and the zero protection connection is correct, firm and reliable;
(3) the protective covers of each department are complete and solid, and the electrical protection device is reliable.
3. Overload use is strictly prohibited. Attention should be paid to acoustics and temperature rise during operation, and stop the machine immediately if any abnormality is found. In the work time is too long, the temperature rise of the machines more than 60 ℃, should stop, after natural cooling, homework all right again. We are aslo Punch Tools Exporters. Welcome to our website know more details.

What Do You Know About Rivet Guns?

As Hand Riveter Manufacturers, we want to say Purpose of riveting gun: if the nut of a product needs to be installed on the outside, and the internal space is too small to allow the press head of the sub riveter to be inserted into the rivet and the splicing method fails to meet the strength requirements, then riveting and rivet are not feasible. Pull riveting must be applied to the fastening area of all thickness plates and pipes (0.5mm-6mm). Use pneumatic or hand pull riveting gun can be riveted once, convenient and firm; Replace the traditional welding nut, make up for the lack of metal sheet, thin tube welding melting, welding nut not good.
Type of riveting gun: according to the power type, the riveting gun can be divided into several types of electric, manual and pneumatic, among which the manual ordinary users are the most widely used, with low price and convenient operation, and cooperate with corresponding electric tools (such as hand electric drill and percussion drill).
There are also manual double-rivet guns, which are available at a discounted price, and used for outdoor billboard production. In fact, we are aslo Hand Riveter Manufacturers. If you have demand about our products, welcome to our website.

You should know the specifications of these grinding wheels!

Procedure/method for safe operation of grinding wheel such as China Grinding Wheel:
Before starting the machine tool, check whether the protective device of the machine tool and the reset switch of various actions are adjusted in place and firm. The protective cover used shall cover at least half of the diameter of the grinding wheel
After the grinding wheel is installed on the spindle of the grinder, it must be idled for not less than 5 minutes. When idling, the operator should stand in a safe position. It is strictly forbidden to stand in the front or tangential direction of the grinding wheel.
Use: use external surface to do the grinding wheel on the working surface. Grinding on the side is strictly prohibited to avoid the grinding wheel breaking.
During grinding, it is prohibited to use the lever to push the workpiece to increase the pressure on the grinding wheel.
When grinding or dressing a grinding wheel, feed the wheel properly and use a special dressing tool to trim the wheel. You should also wear protective equipment
.
The cooling liquid should be closed before the grinding wheel stops rotating, and the grinding wheel should continue rotating until the grinding fluid is completely thrown, so as not to affect the balance performance of the grinding wheel.
It is prohibited to use grinding fluid which is destructive to the tool binding agent. Do not use coolant below 0 c.
We supply all kinds hand tools such as China Measuring Tools. If you want to buy a lot of these tools at wholesale price, please feel free to contact us.

What are the hidden hazards of using hand tools?

These hazards may exist when you use the tools in your China Combination Set.
The hazards that common hand tools can cause include:

1. Cut by the sharp part.
2. Was stabbed with a sharp part.
3. Got hurt by tools.
4. Strike the hands while hammering.
5. Injured by flying shot of debris generated during work.
6. Be affected by the noise generated during work.
7. Dust generated when inhaling.
We supply China File Manufacturer.
We are China File Manufacturer.  If you have demand about our products, welcome to our website know more details, maybe there are the products you need such as China Gear Puller 

What Kinds of Drill Are There?

The drill rig such as China Punches is the main engine for the completion of drilling construction. It drives the drill tool and drill bit to drill deep into the stratum, and the lifting machine on the drill is used to complete the auxiliary work of lifting down the drill tool and casing, extracting the core and replacing the drill bit. Generally divided into the following categories:
(1) percussion drill: steel wire rope percussion drill, drill pipe percussion drill.
(2) rotary drill: vertical shaft type -- manual feed, screw differential feed, hydraulic feed drill; Rotary disc type -- steel rope plus or minus pressure type, hydraulic cylinder plus or minus pressure type drill; Mobile rotary - hydraulic power head, mechanical power head drill.
(3) vibrating drill.
(4) compound drill: a drill which has the functions of vibration, impact, rotation and static pressure combined in different combinations.
In fact, we are aslo Caulking Guns Suppliers. If you have demand about our products, welcome to our website know more details.

Matters Needing Attention During Pperation of Grinding Wheel

As an Grinding Wheel Exporters, we want to say In the daily use of the grinding wheel on the side, we can often find that the operator, regardless of the type of grinding wheel and the type of grinding wheel, freely grinds the side of the grinding wheel, which seriously violates the safety operating procedures and illegal operations. It is not advisable to use the side to grind the grinding wheel on the working face with the circumferential surface according to the procedures. This wheel has large radial strength and small axial strength. If the operator exerts too much force, the grinding wheel will break and even hurt people.

Positive operation problem daily use, many operators are used to operating on the grinding wheel, the reason for this direction can be used, in fact, such behavior should be particularly prohibited grinding wheel operation. The operator should stand at the side of the grinding wheel while grinding the workpiece with the grinder according to the operation procedure.

When using the grinder, some operators, especially young operators, in order to achieve fast grinding speed, excessive force, which is a very unsafe operation behavior. Any wheel has a certain strength when it is flat, which may cause the wheel to break or even fly out to hurt people.

In fact, we aslo are China Holesaw Set Supplier. Welcome to contact us