What should I pay attention to when using a tool?

These issues should be addressed when using tool shared by Knife Cutters Supplier.

What should I pay attention to when using tools?

When using knives and tools, suppliers should pay attention to the following issues:

1, in the use of the blade must pay attention to the protection, the blade is not suitable for cutting, cutting, not suitable for looking at the big bone of the big bone. Running is to disconnect raw materials, rational use of the blade, cutting resistance, should be timely check the presence of bone residue, otherwise easy to hurt the blade.

2, after use should pay attention to wash the knife with warm water, and then put the water in a clean, especially cut into too salty material, because it has a garlic, time growth easy oxidation knife, knife has a certain corrosive, except cha will affect the service life of the knife.

3, for a long time do not use the tool, should be on both sides of the blade grease, to prevent rust, put the blade on a hard surface.

We are the supplier of knives and hammers in China.  Also our factory supply kinds of Garden Hand Tools, If you have demand for our products, welcome to contact us!

What should I pay attention to when using a screwdriver?

Screwdrivers Manufacturer China shares that screwdriver is a tool we often use in life, mainly for the removal of screws, in the use of the screw driver should pay attention to the choice of model, so as to better use. Today the screwdriver manufacturer tells you what to pay attention to when using a screwdriver.

Screwdriver is generally divided into two types, one is a font, the other is a cross, in the use of the time, we should pay attention to the screw model, to choose the screw driver model and size, so as to better use. In addition, the thickness of the screwdriver is different, if the choice of the thickness of the screwdriver and screws do not match, so it will cause inconvenience on the use.

When using the screwdriver, must pay attention to the use of force, so as to ensure that you can screw off. Without damaging the screwdriver. And in the use of time, the screwdriver must be fixed well, make it and screw tightly together, so as to better use.

In the handling of cruciform screws, if there is no cruciform screwdriver, you can use a type of screwdriver, but do not use too hard, otherwise it will make the screwdriver dislocation, can not be used normally.

After use, the screwdriver should be placed well, not placed in a damp place, so as not to rust the screwdriver with damp. Grease the screwdriver if necessary to keep it from rusting. In the screwdriver blade hair, you can polish the screwdriver, but be careful not to polish too sharp, this will affect the use of the screwdriver.

The above is the screwdriver in the use of things to pay attention to, we m

How to remove the oil on the wooden handle of the hammer?

How to remove the oil on the wooden handle of the hammer?

In the process of using the Hammer China, we will put more oil on the wooden handle. When using it, wipe the sweat and oil on the hand and the hammer handle in time. Otherwise, the hammer may slip off the hand and cause injury. Or a damage accident. Then how to deal with the specific, the hammer manufacturer below to explain the specific cleaning method.

When cleaning, use a rag to apply a proper amount of soapy water to wipe the oil on the handle of the hammer. The soapy water can decompose the oil on the wooden handle. The main component of the oil is protein, fat, etc. The main component of the soapy water is glycerin. Ester, a substance that breaks down oil into small molecules and dissolves them into it. After soaking in soapy water for a while, wipe it with a cloth and damp the appropriate amount of water, but be careful not to use too much water, otherwise the wooden handle of the hammer will be wet.

The above is about how to remove the oil stain on the wooden handle of the hammer. If you have any other questions, please call us.

Correct use of hammer

Hammer is divided into many kinds, but the method is basically the same, the following hammer manufacturer for everyone to popularize it!

1. The handle should be firmly installed and plugged with wedges to prevent the hammer head from flying out and injuring people.

2. It is dangerous to use a hammer with a damaged exterior. When struck, the metal on the hammer may fly out.

3. The two hammers should not hit each other, otherwise the metal will flake and fly out to hurt people.

4. When removing parts, it is forbidden to directly hammer the mating surface and vulnerable parts to prevent surface damage or damage.

5. When using a hammer, hold the end of the handle tightly so that you can hit things with less effort.

6. Should wipe the sweat or grease on the hands and wooden handle to prevent the hammer from slipping off.

7. The hammer head should be hit on the object in a flat manner, without any deviation, to prevent damage to the surface shape of the object.

We specialize in all kinds of hammers, if there is a need, if there is a need, you can pay attention to our website, welcome your call.

Points should pay attention to when using sledgehammer

Points should pay attention to when using sledgehammer 

Hammer manufacturer China to share the use of sledgehammer should pay attention to the point.

(1) the connection between the hammer head and handle must be firm. It is absolutely not allowed to use the hammer head that is loose from the hammer handle, and the hammer handle is split or cracked. Add wedges to the mounting holes for hammer head and hammer handle, preferably metal wedges, the length of which should not be more than 2/3 of the mounting hole depth.

(2) the middle of the handle is slightly narrower at the top than at the end in order to give it some flexibility on impact.

(3) when using the sledgehammer, attention must be paid to the front, back, left and right, up and down. People are not allowed to stand within the movement range of the sledgehammer.

(4) the hammer head is not allowed to be quenched, cracked or burr, and it shall be timely repaired if flash burr is found.

Claw hammer can knock, hammer, and can pull out nails, but the larger workpiece should not use claw hammer. When nailing nails, hammer head should be flat nail cap, so that the nail vertical into the wood, lifting nails, should be in the sheep's horn pad, enhance the lifting force, should not be used as a pry hammer hammer, should pay attention to the hammer flat and intact, in order to prevent the nail flying out or the hammer slip injury.

Above is about some content that should be paid attention to using a sledgehammer to introduce, through the above introduction, believe that your knowledge of this aspect is a new understanding, hope to help you, if you still want to know more knowledge in this field, so please timely and we consultation, we will make the detailed introduction, believe that in this process, can learn a lot from it. We look forward to hearing from you. Wish you a happy life!

How to prevent claw hammer corrosion?

In our daily life, there are still many places where we need to use the claw hammer, which is widely used. For example, when the furniture is decorated, or when it is repaired. Today, mainly by the hammer manufacturers to introduce the anticorrosive measures of claw hammer!

Explosion-proof media are not corrosion resistant in all cases, such as in wet ammonia, some ammonium salts, acetylene, wet fluorine, chlorine, chromium ammonium, some dichromate, potassium hydride and other media, the degree of corrosion is quite large. And some media and copper alloy contact will occur after the chemical reaction, the formation of a very high risk of explosive substances, such as acetylene and tempered acetylene steel. Therefore, the use of explosion-proof tools as far as possible in the dry environment, such as it is impossible to avoid the use in the humid environment, try to speed up the operation speed, reduce the working time, in order to avoid large corrosion and the risk of occurrence.

Claw hammer in time to wipe clean after use, is strictly prohibited with corrosive medium with a total storage, so that it can be very effective to avoid the appearance of corruption, the effect is also very good.

In addition, some explosion-proof media are not corrosion resistant under all circumstances, such as in the wet ammonia, some ammonium salt, acetylene, wet fluorine, chlorine, chromium ammonium, some dichromate, potassium hydride and other media, the degree of corrosion is quite large. And some media and copper alloy contact will occur after the chemical reaction, the formation of a very high risk of explosive substances, such as acetylene and tempered acetylene steel. Therefore, explosion-proof tools should be used in the dry environment as far as possible. If it is impossible to avoid using in the wet environment, it is necessary to speed up the operation speed and reduce the working time to avoid the risk of large corrosion.

We specialize in the production of claw hammer, if you are interested in our products, you can pay attention to our website, welcome your call.

[Hammer for sale]Why improve the wear resistance of the hammer head?

Why improve the wear resistance of the hammer head?

The most important part of the hammer is the hammer head, and for the hammer manufacturer, improving the wear resistance of the hammer head is very important. Why is the wear resistance of the hammer head so important? Next let the hammer manufacturer for you to explain in detail.

To raise the wearability of hammer head can improve the quality of the hammer and service life, improve the hardness of carbides, reduce the scratch, improve the carbide morphology, by TiaoKuaiZhuang stale spherical or approximately spherical, reducing the chance of breaking, improve the distribution of carbide, by discontinuous reticular stale dispersion distribution, reduce fragmentation and weaken the function of the body improve the hardness of the matrix, to enhance its ability to impact wear resistance low stress.

The only striking part of the hammer is the hammer head. The hammer head must have strong wear resistance and tough resistance. Especially, the hammer like a claw hammer is not only used for striking, but also has higher wear resistance requirements.

If you have any other questions, or want to buy hammers or other tools, please feel free to contact us.