List of Common Farm Tools And Their Uses

Are you searching for the farm tools names and their uses? This guide contains the list of common farm tools that you are interested in.
There are many farming tools that are used by farmers to increase productivity and reduce the effort required in farming. These farm tools make farming easier and thus increase the yield of agricultural products.
Farmers use different series of farm tools and equipment at different stages of farming. These farming tools are used from soil preparation to planting to harvesting. There is no doubt that this has made farming easier and increased productivity unlike in times past.

But before we list the common farm tools name with their uses, here are the major classifications of the agricultural tools and equipment.

These farming tools and machines can generally be classified into 4 types of tools based on their uses.

-Sowing tools and machinery. tools used by farmers to plant seeds and saplings. Most of these implements are used in the early stages of agriculture, especially after the soil has been tilled. They include seeders, tractors, etc.
-Soil tillage equipment. needed to prepare the soil for planting by tilling it before planting. There are many farm implements that can be used to speed up the soil tillage process. Some of these include harrows, cultivators, plows, harrows, etc.
-Irrigation tools and machinery. water is necessary for the healthy growth of agricultural products. Therefore, irrigation tools and machinery are important farm implements that farmers need. Some irrigation tools include central pivot irrigation systems, irrigation sprinklers, etc.
-Other agricultural tools and equipment. these include other agricultural tools and equipment that are used for non-specific purposes. They are used for different functions and miscellaneous activities.

Find below some of the common farm tools with their uses:

1.Shovel fork
This is one of the farming tools for soil cultivation. The spade is used for digging out roots, leveling the soil, and turning compost before the planting stage.
2. Hoe
Similar to the shovel, it is used to loosen and level the soil in preparation for plowing. A light hoe can also be used for digging trenches.

3. Spade
The spade is one of the common equipment used in homes and farms. It is used for digging and removing soil as well as piles and debris.
4. Shovel
The shovel is another agricultural tool that can be used on farms and construction sites. It is the shovel that surrounds the excavator and is used to remove debris. In addition, it is used to move and mix the soil.

5. Pruning shears
This agricultural tool is used as pruning shears for cutting branches and stems. Due to its sharp edges, it is used to cut the stems of weeds and other plants.
6. Sickle
The sickle is one of the most popular farm tools used in the field for cutting weeds. It is a metal farm tool with a curved blade.
7. Hand fork
A hand fork is one of the farming tools for soil tillage and is used to loosen the soil. Like a shovel, it can be used to mix, lift and turn composted soil.
It can be used to aerate the soil and to remove weeds. Some farmers also use it to transport plants and seedlings.
8. Rake
A rake is a broom-like metal farm tool used to clear soil from farms. It is also used to collect weeds, hay and garbage piles.


There are many other farming tools that are not mentioned here. These tools not only help save time, energy and effort, but also increase agricultural yields and output.
Therefore, the use of farming tools and machines is very important for the production of agricultural products.

How To Choose The Right Paint Rollers And Brushes?

A roller is a roller and a brush is a brush, right? Not really. There are many different types of paint rollers and brushes, and knowing how to choose the right one can save you time.

Choosing the right paint roller and brush requires a good understanding of what you need for your project.

Paint rollers come in a variety of sizes, each with a different application. To choose the right roller, you need to consider the size of the paint roller you want and the type of surface you want to paint.

Roller cages (including the skeleton with handles and rotating "ribs") and their covers come in a variety of lengths. Roller sizes range from mini to 12" (and larger). Mini (or trim) rollers are suitable for painting woodwork and other small areas. To work on walls or ceilings, choose a 9-inch roller; larger rollers are heavier and will tire you out more quickly. Roller cages with plastic ribs are more durable than cardboard ones. Plastic is easy to clean and more durable than cheaper versions.

You must choose the length of the covering and the material of the nap. The nap on the roller is made of natural or synthetic fibers. Gel loops come in different lengths, so use the length recommended for the surface you are painting. Generally speaking, the longer the length of the brush, the more paint it can hold.

There are two main types of paint brushes: one with synthetic bristles and one with natural bristles made from animal hair. If you are using a paint or varnish that can be cleaned with water, a brush with synthetic bristles is a good choice. If you are using an oil-based varnish or paint, then a brush with natural bristles is more appropriate. Brushes with synthetic bristles can be used for oil-based paints, but in most cases, natural bristles will give a smoother surface. However, when using water-based paints, do not use natural bristle brushes. The bristles of the brush will absorb moisture and become too soft.

We know it's tempting to buy a cheap brush and throw it away without cleaning it. This does make sense if you're doing something like priming with an alcohol or oil-based stain, since the quality of the finish doesn't matter and cleaning requires the use of solvents. But for most projects, you'll be glad you spent the extra money on a quality paint brush. Better brushes hold more paint, the results are smoother, last longer, and are easier to clean. Cost is the easiest indicator of quality.

Other Tips

Proper cleaning is essential to ensure your brush lasts longer than a few jobs. Here are some quick steps you can take to make your paint brush last longer.

-Rinse your paint brush thoroughly with warm soapy water after use (for water-based paints). If using oil-based paints, a special solvent remover is required

-Pass the correct cleaning solution through the bristles until the paint becomes loose, rotating the brush constantly to remove as much liquid as possible.

-After drying, place the brush back in its original packaging so that it retains its shape

The Advantages Of Using Power Tools

It’s important to keep in mind that many tools can be quite dangerous when used incorrectly or without the right amount of knowledge or skill. Even with proper training, even the most expert tradesmen can still have an accident. It’s make lighter work of difficult jobs and are essential to those in the skilled trades. A power tool is a tool that is actuated by an additional power source and mechanism other than the solely manual labor used with hand tools. The most common types of power tools use electric motors. Internal combustion engines and compressed air.
It is classified as either stationary or portable, where portable means hand-held. Portable power tools have obvious advantages in mobility. Stationary power tools, however, often have advantages in speed and precision.

Advantages of power tools
-It is known to have multiple users in both homes and industrial establishments. In comparison to other types of tool powered tools have many added advantages. Some of them are given below.
-It is most effective for repair and construction tasks. That’s because you can get your work done without causing much disruption a disturbance at the work site
-It is not restricted in construction works only, it is used in the garden, for housework tasks such as cooking, cleaning, and around the house for purposes of driving (fasteners), drilling, cutting, shaping, sanding, grinding, routing, polishing, painting, heating and more.
-It is impossible to drive screws or nails into concrete with hand tools, but with the right tools, concrete anchors can be driven into anchor walls to concrete floors
-With the help of these tools, you can get your work done at high speed. This is especially important for all those time-consuming tasks that may take you hours to complete
-It is much more powerful than hand tools and have motors, a power source, battery and electricity, on which they run
-Using itis safer as they have controlled range of noise and vibration, which are specified according to each product
-Getting a perfect finish is not possible with a handheld tool, but a power tool helps in giving the desired finish
-With it, you can have a clear estimation of capacity, overall and power input which simplifies the job for workers

Conclusion
Power tools are added leverage for your work. If you want to get your work done on time, and with less effort then it will be wise for you to choose the tools that are needed for your project work. It is among the most time-saving tools ever created.

Wire Tools – Choosing The Right Tool For The Job

Properly outfitting a work bench to work with wire might include more tools than first comes to mind. Using the proper tools will always lead to better results. For this reason, it's important to understand the difference between wire strippers, cutters, and crimpers.
First off, let's get to know the standardized system for measuring diameters of single, solid round electrically conducting wire, the American Wire Gauge (AWG). You will see AWG referenced when determining the appropriate size of some wire tools. With AWG, an increased gauge number signifies a decreasing wire diameter. It is based upon a circular mil system; one mil is equal to 0.001 inch.

Wire Strippers:
Wire strippers are used to remove the insulation from electric wires in order to make contact. There are two primary types: manual and automatic. Of course there is the time consuming scissor method as well as the destructive method of biting off the insulation that can result in pain and a hefty dental bill. We don't recommend either of the latter two methods.
A manual wire stripper has opposing blades like a pair of scissors, but has a notch in the middle of the blades to place the wire. The stripper is then rotated around the wire so the outer insulation comes off while leaving the actual wire intact.
Some wire strippers have varying notch sizes which allow you to strip wires at various AWGs without twisting. There are also automatic wire strippers. They have one side that grips the wire while the other side removes its insulation. Although an automatic stripper greatly reduces the effort required, it can also break thinner wires so they are not suited for all applications. When choosing a stripper, make sure that it has a comfortable grip, cleanly removes insulation from wires, and that it keeps the actual wire intact.

Wire Cutters:
Wire cutters are commonly used to cut copper, brass, iron, aluminum, and steel wire. Some wire cutters have insulated handles which ensure that you will not get shocked from the wires you’re working with.
Diagonal cutters have intersecting jaws that cut the wire at an angle, leaving a flat tip. Electricians commonly refer to these as flush cutters in order to differentiate them from symmetrical cutters, which leave a pointed tip. Unlike a symmetrical cutter, a flush cutter allows you to cut a wire very close to its base.

Wire Crimpers:
Crimping is often used to affix a connector to the end of a cable. Wire crimpers look like a pair of pliers, but join two pieces of metal or other ductile materials (such as wire to a metal plate) together. A crimper deforms one or both of the pieces, which holds them together. Some crimpers are ratcheted, meaning the pieces you are working with will not be released until a threshold pressure is delivered. Ratcheted crimpers sometimes come with interchangeable dies that allow you to crimp connectors of varying widths. When looking for a crimper, be sure to verify the types of wire or cable it is capable of crimping.


The correct tool to use depends on the job at hand so avoid ruining a good project with a bad tool. Remember that wire strippers are best for removing the insulation from wire, while cutters are best for (you guessed it) cutting wire. Pliers help you reach, bend, grab, cut, hold and loop wire, and crimpers are the best tool to join two pieces of ductile material together.