Points should pay attention to when using sledgehammer

Points should pay attention to when using sledgehammer 

Hammer manufacturer China to share the use of sledgehammer should pay attention to the point.

(1) the connection between the hammer head and handle must be firm. It is absolutely not allowed to use the hammer head that is loose from the hammer handle, and the hammer handle is split or cracked. Add wedges to the mounting holes for hammer head and hammer handle, preferably metal wedges, the length of which should not be more than 2/3 of the mounting hole depth.

(2) the middle of the handle is slightly narrower at the top than at the end in order to give it some flexibility on impact.

(3) when using the sledgehammer, attention must be paid to the front, back, left and right, up and down. People are not allowed to stand within the movement range of the sledgehammer.

(4) the hammer head is not allowed to be quenched, cracked or burr, and it shall be timely repaired if flash burr is found.

Claw hammer can knock, hammer, and can pull out nails, but the larger workpiece should not use claw hammer. When nailing nails, hammer head should be flat nail cap, so that the nail vertical into the wood, lifting nails, should be in the sheep's horn pad, enhance the lifting force, should not be used as a pry hammer hammer, should pay attention to the hammer flat and intact, in order to prevent the nail flying out or the hammer slip injury.

Above is about some content that should be paid attention to using a sledgehammer to introduce, through the above introduction, believe that your knowledge of this aspect is a new understanding, hope to help you, if you still want to know more knowledge in this field, so please timely and we consultation, we will make the detailed introduction, believe that in this process, can learn a lot from it. We look forward to hearing from you. Wish you a happy life!

How to prevent claw hammer corrosion?

In our daily life, there are still many places where we need to use the claw hammer, which is widely used. For example, when the furniture is decorated, or when it is repaired. Today, mainly by the hammer manufacturers to introduce the anticorrosive measures of claw hammer!

Explosion-proof media are not corrosion resistant in all cases, such as in wet ammonia, some ammonium salts, acetylene, wet fluorine, chlorine, chromium ammonium, some dichromate, potassium hydride and other media, the degree of corrosion is quite large. And some media and copper alloy contact will occur after the chemical reaction, the formation of a very high risk of explosive substances, such as acetylene and tempered acetylene steel. Therefore, the use of explosion-proof tools as far as possible in the dry environment, such as it is impossible to avoid the use in the humid environment, try to speed up the operation speed, reduce the working time, in order to avoid large corrosion and the risk of occurrence.

Claw hammer in time to wipe clean after use, is strictly prohibited with corrosive medium with a total storage, so that it can be very effective to avoid the appearance of corruption, the effect is also very good.

In addition, some explosion-proof media are not corrosion resistant under all circumstances, such as in the wet ammonia, some ammonium salt, acetylene, wet fluorine, chlorine, chromium ammonium, some dichromate, potassium hydride and other media, the degree of corrosion is quite large. And some media and copper alloy contact will occur after the chemical reaction, the formation of a very high risk of explosive substances, such as acetylene and tempered acetylene steel. Therefore, explosion-proof tools should be used in the dry environment as far as possible. If it is impossible to avoid using in the wet environment, it is necessary to speed up the operation speed and reduce the working time to avoid the risk of large corrosion.

We specialize in the production of claw hammer, if you are interested in our products, you can pay attention to our website, welcome your call.

[Hammer for sale]Why improve the wear resistance of the hammer head?

Why improve the wear resistance of the hammer head?

The most important part of the hammer is the hammer head, and for the hammer manufacturer, improving the wear resistance of the hammer head is very important. Why is the wear resistance of the hammer head so important? Next let the hammer manufacturer for you to explain in detail.

To raise the wearability of hammer head can improve the quality of the hammer and service life, improve the hardness of carbides, reduce the scratch, improve the carbide morphology, by TiaoKuaiZhuang stale spherical or approximately spherical, reducing the chance of breaking, improve the distribution of carbide, by discontinuous reticular stale dispersion distribution, reduce fragmentation and weaken the function of the body improve the hardness of the matrix, to enhance its ability to impact wear resistance low stress.

The only striking part of the hammer is the hammer head. The hammer head must have strong wear resistance and tough resistance. Especially, the hammer like a claw hammer is not only used for striking, but also has higher wear resistance requirements.

If you have any other questions, or want to buy hammers or other tools, please feel free to contact us.

[Hand Tools Exporter China]Why improve the wear resistance of the hammer head?

Why improve the wear resistance of the hammer head?

Hand Tools Exporter China shares that the most important part of the hammer is the hammer head, and for the hammer manufacturers, improving the wear resistance of the hammer head is very important. Why is the wear resistance of the hammer head so important? Next let the hammer manufacturers for you to explain in detail.

To raise the wearability of hammer head can improve the quality of the hammer and service life, improve the hardness of carbides, reduce the scratch, improve the carbide morphology, by TiaoKuaiZhuang stale spherical or approximately spherical, reducing the chance of breaking, improve the distribution of carbide, by discontinuous reticular stale dispersion distribution, reduce fragmentation and weaken the function of the body improve the hardness of the matrix, to enhance its ability to impact wear resistance low stress.

The only striking part of the hammer is the hammer head. The hammer head must have strong wear resistance and tough resistance. Especially, the hammer like a claw hammer is not only used for striking, but also has higher wear resistance requirements.

If you have any other questions, or want to buy hammers or other tools such as Agriculture Hand Tools, please feel free to contact us.

The important position of screwdriver

The important position of screwdriver

Turn the screwdriver is a kind of used to twist screws to force the tools in place, usually with a thin wedge head, can insert the slotted screw head or notch - beijing-tianjin-hebei JinYu lu and shaanxi shaanxi dialect is called "screwdriver", jiangxi, anhui and hubei, shaanxi guanzhong, known as the "driver", the central and western regions known as the "change knife", Yangtze river delta region known as the "screw driver. Screwdriver has very important position, Screwdriver Manufacturer China introduce the function of screwdriver for everybody below.

To repair a cell phone, you need a screwdriver to open the case (some cell phones have a concealed clasp without a screwdriver). But USES the screw mostly USES the hexagon screw; Different mobile phones have different specifications, generally T5, T6, T7, T8, some models also have special screws, need to use a special screwdriver. Also need to prepare some small words from the small plum screwdriver. In the selection of such tools, you should choose A, B set of batch, it almost includes all mobile phone shell opening tools. When opening the housing, choose a suitable screwdriver according to the type and specification of screws fixed on the housing. If the selection is not appropriate, it is possible to screw the groove of the flat, slippery phenomenon.

Above is the basic function of the screwdriver, As  a very formal China Hand Tools Manufacturer, if the problem, welcome to inquire.

The process of grinding the wooden handle of octagonal hammer

Below the China Hand Tools Exporter to bring you octagonal hammer wooden handle grinding process.

For the making of octagonal hammer, wooden handle grinding is an important process, because grinding can make the wooden handle surface smooth, more convenient to use, but also need to master the correct method and skills when grinding.

In the process of making and polishing the wooden handle of the octagonal hammer, the wooden handle should be shaped before the fine grinding and then polished with sandpaper. Polish along the grain, not against the grain, to prevent permanent scratches on the wooden handle. For flat surfaces, a abrasive block can be used, as the sand on the sandpaper will scratch the wood surface. In addition, different fillings can be selected for different wooden handle representations, which can make the polishing effect better.

But in the process of grinding, it should be noted that this is not only a technical work, but also requires patience and care, grinding to a large extent will affect the appearance of octagonal hammer wooden handle and usability.

Above is how to polish the wooden handle of the octagonal hammer, if you have other questions, welcome to call consultation, looking forward to your call.

Welcome to purchase our Agriculture Hand Tools!